1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Knuckle Seal Help..am I Crazy?

Discussion in 'Early CJ5 and CJ6 Tech' started by Jonbbrew, Aug 14, 2020.

  1. Aug 17, 2020
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    you described it quite well. Most rob the Dana 27 of the Spicer U-Joint axles to use in the 25. I’ve not seen a factory 25 with Spicer U-joints but they could have been used. I do know all the 27’s I’ve seen and disassembled had them.
     
    Fireball and Ol Fogie like this.
  2. Aug 17, 2020
    Jonbbrew

    Jonbbrew Member

    Paso Robles, CA
    Joined:
    Mar 14, 2015
    Messages:
    739
    More than one? I see the one on the hub but is there one on the Axle housing where the axle inserts? Inside the “cup or ball or whatever it’s called that the knuckle connects to”?
     
  3. Aug 18, 2020
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,627
    Ahh, that makes sense. Now that I think about it, all the 25's I've had apart had non-spicer U-joints. Thanks for the info!
     
New Posts