1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

is the cheapie tubing notcher from Harbor Freight worth it???

Discussion in 'Builds and Fabricators Forum' started by DanStew, Dec 25, 2004.

  1. Dec 25, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I am thinknig bout getting the tubing notcher from harbor freight so i can fishmouth the tubes for th eroll cage. Is it worth the $30 it is, or should i just use the saw to "V" out th etube and grind to round it off.
     
  2. Dec 25, 2004
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,348
    $30 is cheap for a tool....IMO
     
  3. Dec 25, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    yeah, you get what you pay for, pretty much it is jsut the backet to hold everything together, i have to add the hand drill and the hole saw blade.
     
  4. Dec 26, 2004
    JohnyJeep

    JohnyJeep BLOWING A XING NEAR U@2AM

    Beautiful Cody WY
    Joined:
    Sep 22, 2002
    Messages:
    513
    I used this program to make paper templates for notching the tubing.

    http://www.tonyfoale.com/software.htm

    Scroll to the very bottom of the page, and thats the one I used.


    You just have to go online to find conversion from metric to standard. Once I traced the pattern, I just used a bandsaw and a bench grinder to do the job.
     
  5. Dec 26, 2004
    Jeepenstein

    Jeepenstein Me like Jeep..

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,133
    I'll put it this way.. it works.. sort of.. I'd spend the money on a better one next time.. the prob is the clamp is not quite square with the arbor so my fishmouths are not centered on the pipe.. not sure if they are all that way but that's how mine was.. luckily I got mine real cheap, 10$ used at the flea market I modified it to work but it still kinda sucks. Gonna make my own I think..


    BUBBA
     
  6. Dec 26, 2004
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    Used the chopsaw and angle grinder with cutoff wheel for mine. I also used the program online to print out templates to use on the tube.

    Metric to standard conversion is 1" = 25.4 mm
     
  7. Dec 26, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I did use the grinder and sawzall to cut out the notches, had some problems judging the notches, but eventually got everything to fit. It is tacked down now, but i may redo a few pieces because i was jsut not too happy
     
  8. Dec 27, 2004
    ljspop

    ljspop Lurking Bronco Dude

    San Diego, CA
    Joined:
    Jan 29, 2003
    Messages:
    394

    Uh.... UWOP?
     
  9. Dec 29, 2004
    Hansh

    Hansh Going Mobile

    SE Wisconsin
    Joined:
    Dec 7, 2004
    Messages:
    425
    I have used quality metal hole saws and held the tubing in a vise. This works to get you pretty close and then grind the notch to make your final fit.
     
New Posts