1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

How to seat a clutch???

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Oct 31, 2004.

  1. Oct 31, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I am probably asking it wrong, but my buddy mentioned it and a friend today mentioned it was in the jeep bible, something bout if you install a new clutch you take it to a phone pole, or tree and put it up to the object and put the tranny in 3rd and then let go of the clutch. And let the clutch spin to seat it. Is this correct?? I do not have a phone pole, but do hav a tree. I am wondering if i did this will i dig holes in the lawn, because i dont want that to happen. This may cure my dragging clutch. So how do i properly do this? For how long and what gear and such. Or does anyone have a printout of the directions in the jeep bible??

    Thanks!!!
     
    DanStew, Oct 31, 2004
    #1
  2. Oct 31, 2004
    oldjeep

    oldjeep Sisyphus at work

    Victoria, MN
    Joined:
    Sep 19, 2003
    Messages:
    267
    I've done that to un stick a clutch before, by pressing the clutch in and pushing the bumper into a tree. I would think that all you would accomplish by letting the clutch out in 3rd gear while up against a tree would be to kill the motor.
     
    oldjeep, Oct 31, 2004
    #2
  3. Oct 31, 2004
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    Dan: Sounds like a great way to burn your flywheel and P plate. I have heard of that, and used it, when I owned a Jap MC (Yamaha). Put it in 1st against a wall and let out the clutch. The Jap bikes had a tendency for the clutch to become a bit grabby. It worked, for about a month or so. But now I own a Triumph. Best clutch I've ever use in a MC.

    I would Look at this advice with a "jaundiced" eye, if you know what I mean.
     
    James P. Enderwies, Oct 31, 2004
    #3
  4. Oct 31, 2004
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    low range maybe?
     
    66cj5, Oct 31, 2004
    #4
  5. Oct 31, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    i do not plan on riding it for a long time, just a couple of times and stop to let it cool
     
    DanStew, Oct 31, 2004
    #5
  6. Oct 31, 2004
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    Dan: Why do you need to "Seat" it. Is it grabby? Not completely dissengaging? Or what? If you're carefull, and don't "smoke" it, it might be worth a try--but be carefull.
     
    James P. Enderwies, Oct 31, 2004
    #6
  7. Oct 31, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    It is grabby i guess. i can get it into gear but it seems like i have to fiddle with the shifter to get it in gear. actually seems to get better as i play with the shifter more often, my firend said it just needs to wear a bit to work properly. it happened to him i guess. it defiantely isnt the slave ir MC, they have been bled and everything works, and it will go into gear, just not all the time.
     
    DanStew, Oct 31, 2004
    #7
  8. Oct 31, 2004
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,523
    { article/pic in Florida newpaper tomorrow}

    "man pulls tree down on top of him and his Jeep, said to just have been "seating" his clutch!"

    j/k
     
    jpflat2a, Oct 31, 2004
    #8
  9. Oct 31, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    You just dont know how true that may be. the tress up front , one was damaged pretty good from hurricane charlie. Florida is mostly sand and i have no doubt i could knock the tree over :( But there really isnt a choice, that is almost the sturdyest thing in the yard. I do not need cops comnig after me for knocking over a phone pole
     
    DanStew, Oct 31, 2004
    #9
  10. Oct 31, 2004
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    Dan: Give it a try, just don't go overboard. Kind of funny, my '68 with a Centerforce clutch kind of "grinds" going into 1st gear. But only if I try to put it in "immediatly" after comming out of reverse or something. If I let it "sit" with the clutch depressed for a "count of 2", it goes in without a complaint. Seems to me to be the clutch "draging" a slight bit. Takes a while for the P-plate to stop spinning or so it seems. But, no biggie, I just wait or blip the throttle and match it. I love the Centerforce combo in mine. Even Hippo remarked, when he was here and drove it, that the clutch seemed GREAT.
     
    James P. Enderwies, Oct 31, 2004
    #10
  11. Oct 31, 2004
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    hey dan. have you thought of a parking lot light pole? you could give that a try.
     
    mb82, Oct 31, 2004
    #11
  12. Oct 31, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I cant think of a pole nearby. :( But that is a very good idea
     
    DanStew, Oct 31, 2004
    #12
  13. Oct 31, 2004
    James P. Enderwies

    James P. Enderwies Sponsor

    Lake Havasu City, AZ
    Joined:
    Feb 2, 2003
    Messages:
    747
    I can see it now!!! "Local Scottish Man injured while trying to push over a light pole in local parking lot. Thought he was practicing for the 'Caber Toss'"!!!! :rofl:
     
    James P. Enderwies, Oct 31, 2004
    #13
  14. Oct 31, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Well i did it. I got the jeep out of the garage and drove it around the neighborhood. it actually shifted pretty good, no lag realy to speak of. Only issue i have now is i think i have a spark plug out of order so it is running a touch rough adn bogged down at th ehigher rpms. I got back from aroudn the block adn put the jeep to the tree and i threw it in 1st gear, and 2nd gear also and ltet it ride a little, the jeep wanted to climb that tree i tell. The tree stayed put and i am feeling a bit more confident on driving the jeep around now. Just have to recheck the spark plug wires and probably add some more air to the tires, they were REALLY out of round for sitting so long. LTBs are great tires but boy to they get flat spotted. I guess it just needed to get driven and worn in
     
    DanStew, Oct 31, 2004
    #14
  15. Oct 31, 2004
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    How about a big concrete retaining wall or somrthing like that?
     
    jd7, Oct 31, 2004
    #15
  16. Oct 31, 2004
    maxx

    maxx Banned

    Menlo Park, Ca
    Joined:
    Apr 22, 2003
    Messages:
    171

    might wanna keep it under 50 though
     
    maxx, Oct 31, 2004
    #16
  17. Oct 31, 2004
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Darwin award in the making!!:D
     
    Mcruff, Oct 31, 2004
    #17
New Posts