1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

How much will I need?

Discussion in 'Jeep Trailer Tech' started by sac13, Jan 29, 2008.

  1. Jan 29, 2008
    sac13

    sac13 Come oooonnnnn summer....

    Shelby Township, MI
    Joined:
    Jun 12, 2006
    Messages:
    321
    I'm planning on using Herculiner for the tub on my new trailer (currently Bantam - near future M416R) ). I have an unopened quart at home from when I did the tub on my CJ. Would another quart be sufficient (so 2 quarts total)? I'm planning on the inside of the tub and rails.

    Also, how many quarts (or a gallon) do you think I will need of POR15 to do the frame, axles and bottom of the tub?

    Thanks!!
     
    sac13, Jan 29, 2008
    #1
  2. Jan 29, 2008
    97XJ_95YJ

    97XJ_95YJ I hate torx bolts

    Woolrich, PA
    Joined:
    Feb 3, 2006
    Messages:
    250
    Not sure about the Herculiner, but a quart of POR-15 goes a long way. There is no way you would need more than two quarts of POR-15 to do the whole trailer. I'd say if you're only doing the frame and underside of the tub, you might be able to do it with one quart, as long as you don't spill a bunch in the process. If you plan to put on two coats, I'd go with 2 quarts of POR just to be safe.
     
    97XJ_95YJ, Jan 29, 2008
    #2
New Posts