1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

High Steer installed

Discussion in 'Builds and Fabricators Forum' started by 4x4chevette, Apr 25, 2005.

  1. Apr 25, 2005
    4x4chevette

    4x4chevette Member

    Lancaster, Ohio
    Joined:
    Dec 19, 2004
    Messages:
    133
    Since MY screw up I could only use one of the arms, and I ahve to keep the tie rod below the springs. other than that Myers Machine Shop did a WONDERFUL job... but heres where the new darglink sits...

    Aint she so parrallel to the ground?
    [​IMG]

    [​IMG]

    [​IMG]

    The new Tom Woods Driveshaft
    [​IMG]
     
    4x4chevette, Apr 25, 2005
    #1
  2. Apr 25, 2005
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Very Nice 8)
     
    neptco19, Apr 25, 2005
    #2
  3. Apr 25, 2005
    Hawk62cj5

    Hawk62cj5 Captain of OldSchool

    Brodnax Va.
    Joined:
    Oct 28, 2004
    Messages:
    694
    Nice that baby is heavy duty.
     
    Hawk62cj5, Apr 25, 2005
    #3
  4. Apr 25, 2005
    jd7

    jd7 Sponsor

    Nacogdoches,Texas
    Joined:
    Mar 30, 2004
    Messages:
    1,745
    very nice
     
    jd7, Apr 25, 2005
    #4
  5. May 5, 2005
    XJ_Ranger

    XJ_Ranger Tide rocks my socks off

    Lincoln, NE /...
    Joined:
    Nov 14, 2004
    Messages:
    25
    what closed knuckle axle is that?
     
    XJ_Ranger, May 5, 2005
    #5
  6. May 6, 2005
    willysnut

    willysnut Banned

    Newnan, Ga.
    Joined:
    Oct 8, 2003
    Messages:
    654
    What size bolts hold the arm on? Seems like a lot of extra leverage (sheer load) on the bolts. Awesome machine work.
     
    willysnut, May 6, 2005
    #6
  7. May 6, 2005
    4x4chevette

    4x4chevette Member

    Lancaster, Ohio
    Joined:
    Dec 19, 2004
    Messages:
    133
    Thats a D30 from a 72 Wagoneer... same knuckles as the d27

    Those are 3/8's grade 8 bolts.... with tappered sleeves.. gonna see if it pulls the threads.. sicne its street only... if ti does, ill stud it....

    its also running 1ton chevy rod ends.
     
    4x4chevette, May 6, 2005
    #7
New Posts