1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Help with a T90A-1 Tranny?

Discussion in 'Early CJ5 and CJ6 Tech' started by Frankenmuth_Tom, Sep 4, 2004.

  1. Sep 4, 2004
    Frankenmuth_Tom

    Frankenmuth_Tom Jeep Watcher

    Okeechobee, FL
    Joined:
    Jul 2, 2004
    Messages:
    51
    Guys,

    While I was doing my clutch on my '66 CJ-5 with 225V6, I had the T90A-1 Tranny apart. How ever, when I went back together, I couldn't remember which way the second/third clutch sleeve faces. I added a photo in General Pictures that shows the assembled T90 with the input shaft to the left. There is a tapered sleeve to one side of the slot the shifter fork rides in, to shift to second and third gear. Is this put together correctly, or do I need to turn the sleeve over before I button things up????

    Many thanks! I expect to have the clutch assembled today, and the tranny installed on Monday (Labor day) and with some luck will have it all back together later next week, before we fly to Florida for the weekend.

    THANKS AGAIN!

    Tom in Frankenmuth, MI
     
    Frankenmuth_Tom, Sep 4, 2004
    #1
  2. Sep 4, 2004
    imported_DSG

    imported_DSG New Member

    left coast
    Joined:
    Dec 31, 2003
    Messages:
    44
    according to my fsm you have it correct :p .............good luck
     
    imported_DSG, Sep 4, 2004
    #2
  3. Sep 4, 2004
    Frankenmuth_Tom

    Frankenmuth_Tom Jeep Watcher

    Okeechobee, FL
    Joined:
    Jul 2, 2004
    Messages:
    51
    EXCELLENT! Thanks for the help.

    Where else can you get this kind of support from a group of total strangers???

    Tom in Frankenmuth
     
    Frankenmuth_Tom, Sep 4, 2004
    #3
New Posts