Hardtop Door Hinge Hardware Plans Meyers and Kelly

I made these plans for the hardtop door hardware if you need to make some. Should work on Kelly and Meyers tops. If you know of others feel free to add

 

Would you be willing to make a set of the and sale them? Is this the Top and bottom Hinges? I have an old Kelly top and do not have any hinges. What are the steel rails you have shown?

 

I want to fabricate a pair. Can you repost the image, or email the drawing?
I can;t access a clean copy to read the dimensions.

Thanks!

 

i was really hoping these were the other part of the hinge. anyone got drawings for those?

 

Wow, nice job! I don't have a hardtop but this is really great for some lucky folks who do!

 

i wouldn't necessarily call us locky, it's a pain to get off and is a bit low getting in, but it is likely better in the winter than a soft top (if you have a heater, which i don't)

 

I have two sets of these available if anyone needs them. I have no lower hinges because those are readily available.

 

Jeep2003- are these still available?

 

Hi,
Do you still have a source that can build the gap pieces and upper hinge?

also, you mentioned the lower hinges are readily available. I’m searching without luck. Can you point me in the right direction?

Thanks!

 

I was making them myself. I'll see what i can come up with. The lowers used to be everywhere. The YJ ones should work
https://www.amazon.com/Rugged-Ridge...ocphy=9005396&hvtargid=pla-575081983836&psc=1

 

Arik I have a set made if you still need them my email is porsche930dude@gmail.com