1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Glove Box Key

Discussion in 'Early Jeep Restoration and Research' started by mickeykelley, Dec 12, 2016.

  1. Dec 12, 2016
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,900
    My glove box has a slot for a key to lock it, but my ignition key does not fit. In 58, were they keyed to the same key or different? My ignition key is a little worn so I'm thinking about pulling the switch and taking it to a locksmith to rekey it and hopefully get a glove box key matching?
     
  2. Dec 12, 2016
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    I don't think they ever matched for any years. Doors, tops and glove boxes used the same key.

    A locksmith can make short work of what you want done. I personally wouldn't lock it...A prowler can do a lot of damage wanting to see what you've got locked up.
     
    dnb71R2 likes this.
  3. Dec 12, 2016
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
    Tonk had a matching ignition/glove box lock, which is interesting as Tonk would have had a floor starter switch originally & the switch was for key start. :whistle:

    H.
     
  4. Dec 12, 2016
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    My brain just exploded.

    I guess there are no absolutes when it comes to Jeeps. :rolleyes:
     
  5. Dec 12, 2016
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
    That would explain the hair then...

    H. :)
     
    Dandy likes this.
  6. Dec 12, 2016
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754

    Ouch!:rofl:
     
  7. Dec 28, 2016
    army grunt

    army grunt Member

    Georga USA
    Joined:
    Feb 21, 2012
    Messages:
    269
    Over a key, (((((((really?)))))
    This was my guess also"I don't think they ever matched for any years. Doors, tops and glove boxes used the same key".
     
  8. Jan 31, 2017
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    I went to get a glove box key made, the guy said that they are two different types of locks. He made a gloves box key for me and it does not go into my ignition switch very well. My ignition is well worn, but I don't want to change it, it has a tab that holds it straight in the dash.
     
  9. Feb 2, 2017
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    Rick, your switch should be held in the dash by a chrome hex nut. Many aftermarket switches have a knurled retaining nut. Does you key have "Jeep" embossed?
    All the ignition switches I have seen with the spring loaded "start" feature do not have a matching glovebox key. As Howard pointed out, the early CJ5s with the floor starter could have a matched key for the ignition and glovebox, though glovebox locks in this era were fairly uncommon.
    -Donny
     
  10. Feb 3, 2017
    Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I live South of...
    Joined:
    Dec 2, 2014
    Messages:
    1,725
    It is Donny, but the 67 dash I used has a tab on it that holds the switch from turning in the hole, that the 64 Tux dash didn't. I would have to file the tab off to change the ignition switch. I didn't use the Tux dash, didn't want the column shift, although I kept all the parts so it could be put back in if I chose to.
     
New Posts