1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Frame Repair

Discussion in 'Builds and Fabricators Forum' started by tripilio, May 31, 2020.

  1. May 31, 2020
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    This is the state of my rear left side of the frame. I know I have to repair it but I'm unsure how to tackle it. I am inclined to replace the shackle hanger rather than re-sleeve it. Any ideas how to proceed other than fabbing sections and weld them together?

    20200531_115158_copy_1032x774.jpg 20200531_115225_copy_1032x774.jpg
     
  2. May 31, 2020
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    that’s pretty much the only thing you can do.
     
    tripilio likes this.
  3. May 31, 2020
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,491
    There may be replacement "frame horns" available from the aftermarket. Still require welding and reinforcing. Or originals could be cut off an old frame if, uhh, somebody had a couple of old frames laying around. Ahem. Cough. PM me if you want to me look around here a little.
     
    tripilio likes this.
  4. May 31, 2020
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    I would look for replacement sections and just weld them in. You could piece it back together, but that would be alot of guess work. I know people have done it, and it can be done. If you section a frame, don't weld a straight line, make sure you Z notch it to spread the wealth and increase overall strength.
     
    Last edited: May 31, 2020
    tripilio likes this.
  5. May 31, 2020
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,407
    if it was me I would try and find another donor frame and cut the rear off of it
    see above :D
     
    tripilio likes this.
  6. May 31, 2020
    73 cj5

    73 cj5 Not ready for the junkyard yet

    Clinton, Mississippi
    Joined:
    Jan 10, 2014
    Messages:
    2,137
    C channel or square tubing out of the question?
     
    tripilio likes this.
  7. Jun 1, 2020
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    PM'd you. (y)
     
New Posts