1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ford Saginaw + 4.3 V6

Discussion in 'Builds and Fabricators Forum' started by Jrobz23, Nov 3, 2017.

  1. Nov 3, 2017
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    Has anyone done this combination? I have the reverse Saginaw, Ford style, setup behind the cross member. Has anyone used this setup with a 4.3V6 (or 225) swap?

    My F Head was rather tired, and finally started puking exhaust into the coolant. I have a spare, so I'm putting that in, but still wondering about long term what I want in there. I like the idea of the 4.3, but not if I gotta re-engineer my steering again. I'm worried mostly about exhaust clearance and the steering rod. I would think the Ford style steering rod will be higher up than a Chevy style Saginaw setup.
     
  2. Nov 3, 2017
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Liberty Lake, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,656
  3. Nov 3, 2017
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    My search-foo is weak. TY!

    I have an inside frame-rail ford setup, but I like that approach much more (live and learn), specially with a little more width of a D30. My issue is how close to the engine my steering rod is. I had to shorten my 134 exhaust manifold to fit this setup with the stock motor.
     
    ITLKSEZ likes this.
  4. Nov 6, 2017
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
New Posts