1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Floor panels...

Discussion in 'Jeep Trailer Tech' started by Chris Insull, Mar 3, 2010.

  1. Mar 3, 2010
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    Anyone know what the physical differences are between a BT3-C and an MBT? Specifically looking for which direction the edges are bent in:rofl:...
     
    Last edited: Mar 3, 2010
    Chris Insull, Mar 3, 2010
    #1
  2. Mar 7, 2010
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    I'm pretty sure the main diff is the Bantam back edge is bent down (tailgate) and the MBT is bent up (welds to back panel). Was talking to some one a while back and they had just re-bent that back edge down and used the military panel for there Bantam
     
    windyhill, Mar 7, 2010
    #2
New Posts