1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Flatfender Springs...

Discussion in 'Flat Fender Tech' started by mikieboy, Sep 23, 2011.

  1. Sep 23, 2011
    mikieboy

    mikieboy Member

    Jacksonville, FL
    Joined:
    Mar 21, 2005
    Messages:
    155
    My front and rear springs are sagging bad. Need to be replaced. What options do I have, go back with stock springs or lifted? It is a basic daily driver, don't need alot of lift. I was looking at the Superlift 1" lift springs. Has anyone tried these. They are cheaper than stock springs. Just curious what others have done....Thanks..
     
    mikieboy, Sep 23, 2011
    #1
  2. Sep 24, 2011
    curbcrawler

    curbcrawler Hacker

    Ohio
    Joined:
    Sep 12, 2010
    Messages:
    59
    yep got em. I also have the spring hanger conversion kit. Both are quality products that provide a better ride than stock.
     
    curbcrawler, Sep 24, 2011
    #2
  3. Sep 24, 2011
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    I'm running the Superlift 1" springs on my 3B for about 15 years now and love them! I'm running them with rs9000 shocks, and 32x10.5x15 Super Swamper radials as well, and get a very nice ride.
     
    windyhill, Sep 24, 2011
    #3
  4. Sep 24, 2011
    86cj7

    86cj7 New Member

    Joined:
    Dec 15, 2009
    Messages:
    35
    i am running a set of stock replacements from crown automotive on my 46 cj2a great springs military wrap is a plus
     
    86cj7, Sep 24, 2011
    #4
  5. Sep 28, 2011
    jwinsley

    jwinsley Windblown

    Chattanooga
    Joined:
    May 4, 2011
    Messages:
    96
    I have the 2.5" lift on my in progress project. I wish I had gone with the 1" in retrospect.
     
    jwinsley, Sep 28, 2011
    #5
  6. Sep 28, 2011
    y2grey

    y2grey Member

    Fayetteville NY
    Joined:
    Sep 18, 2011
    Messages:
    106
    Funny, I have 1 inch and wish I had 2.5 or 3.
     
    y2grey, Sep 28, 2011
    #6
  7. Sep 30, 2011
    stinsonj

    stinsonj Member

    Oregon
    Joined:
    May 23, 2011
    Messages:
    53
    I have a 3" lift on mine with 32" swampers. In my opinion, it looks just about right[​IMG][​IMG]
     
    stinsonj, Sep 30, 2011
    #7
  8. Sep 30, 2011
    y2grey

    y2grey Member

    Fayetteville NY
    Joined:
    Sep 18, 2011
    Messages:
    106
    Nice look! how do those springs work? What manufacture are they?
     
    y2grey, Sep 30, 2011
    #8
  9. Sep 30, 2011
    stinsonj

    stinsonj Member

    Oregon
    Joined:
    May 23, 2011
    Messages:
    53
    Im pretty sure they are Rancho springs, but it was awhile ago i installed them so im not 100% sure. They work pretty good. However I did also do a shackle reversal which could attribute somewhat to the smoothness of the ride. Here is a picture of the jeep flexed out. When i did this, the springs were virtually brand new so im guessing i would get a bit more flex now.[​IMG]
     
    Last edited: Sep 30, 2011
    stinsonj, Sep 30, 2011
    #9
New Posts