1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fixed: V6 Cutting out at cruising speeds?

Discussion in 'Early CJ5 and CJ6 Tech' started by sparky, May 14, 2006.

Page 5 of 50
  1. May 17, 2006
    vanguard

    vanguard

    Re: V6 Cutting out at cruising speeds?

    So now we have the HEI distributor with the custom advance, clean fuel filters and a re-mounted carb? I think I'd try a new set of plugs, plug wires and a maybe a cap/rotor, depending on vintage.

    If it's still a points distributor, I'd pop in a condensor.
     
    vanguard, May 17, 2006
    #81
  2. May 17, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Re: V6 Cutting out at cruising speeds?

    Rebuilt carb? Check
    Cleaned up fuel filters? Check
    New Cap? Check
    New Rotor? Less than 4 months old, Check
    New Coil? Less than 4 months old, Check
    New Plug Wires? Less than 4 months old, Check
    New Plugs? Less than one month old, Check

    All that stuff has been replaced since I got the Jeep. The two things that coincide are putting in an OF distributor, points or HEI and new plugs. I can understand one plug being bad but all 6? This is happening on both sides of the engine. Maybe you guys know something I don't regarding plugs, can a whole "batch" be bad?
     
    sparky, May 17, 2006
    #82
  3. May 17, 2006
    vanguard

    vanguard

    Re: V6 Cutting out at cruising speeds?

    I don't think a whole batch could be bad, but a bad coil wire would effect all of them.
     
    vanguard, May 17, 2006
    #83
  4. May 17, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Re: V6 Cutting out at cruising speeds?

    Coil wire? On an HEI? Or the power wire to the coil? I checked it, it's getting a full 12V.

    I don't see how it's related to the ignition. It's not related to RPM isn't the problem. The speed is. At almost exactly 55 mph it starts popping and cutting out which is at an RPM well below where I'm able to drive it in 1st or 2nd gear. Seems like if it were a weak ignition somewhere it'd cut out at the same RPM regardless of speed? Maybe not?
     
    sparky, May 17, 2006
    #84
  5. May 17, 2006
    vanguard

    vanguard

    Re: V6 Cutting out at cruising speeds?

    D'oh. I'm still thinking points.
     
    vanguard, May 17, 2006
    #85
  6. May 17, 2006
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822
    Re: V6 Cutting out at cruising speeds?

    Long shot here, but could there be a hot wire grounding out? It would be a huge cowinkydink, but mebbe a wire is "blowing back" in the breeze and shorting?

    How about grounds?

    Wait a second.....Didja try driving with the gas cap loose/off? Mebbe it's sucking the gas down faster than the air in the tank can equalize? And are you sure that the steel lines are clear? If it's been sitting, some junk may have congealed in there....

    Just some silly things to look for....Good luck!
     
    Old Bill, May 17, 2006
    #86
  7. May 17, 2006
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Re: V6 Cutting out at cruising speeds?

    At the risk of asking the obvious, have you checked the tank for crud at the pickup?
     
    w3srl, May 17, 2006
    #87
  8. May 17, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Re: V6 Cutting out at cruising speeds?

    At this point I'm willing to try anything. :rofl:

    I doubt gas has congealed anywhere, it's pretty fresh. Tank was new last fall too before someone suggests that. :D
     
    sparky, May 17, 2006
    #88
  9. May 17, 2006
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Re: V6 Cutting out at cruising speeds?

    Got a banana stuck up yer tailpipe? :D
     
    Hippo393, May 17, 2006
    #89
  10. May 18, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Re: V6 Cutting out at cruising speeds?

    No I haven't. Dropping the tank is a pain, it's full, it's a new poly tank last fall so that's not obvious to me. :(
     
    sparky, May 18, 2006
    #90
  11. May 18, 2006
    rookieupgrade1

    rookieupgrade1 New Member

    WI
    Joined:
    May 15, 2006
    Messages:
    37
    Re: V6 Cutting out at cruising speeds?

    every gear at a specific RPM exurts a different amount of load on the engine. Is it possible that @ 55 you are running too rich? Too much fuel (due to haveing alot of load and compensating with pedal) would cause a bad/ineeficient mixture and cause a misfire.

    Just a thought.:?
     
    rookieupgrade1, May 18, 2006
    #91
  12. May 18, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Re: V6 Cutting out at cruising speeds?

    Carb's been rebuilt now and now the adjustment screws have been changed at least 4x during this whole process. Backfires through the carb if anything, not out the tailpipes like I'd expect if it were rich (which a couple weeks ago it was and it was doing).

    Lean it out more?
     
    sparky, May 18, 2006
    #92
  13. May 18, 2006
    rookieupgrade1

    rookieupgrade1 New Member

    WI
    Joined:
    May 15, 2006
    Messages:
    37
    Re: V6 Cutting out at cruising speeds?

    not nessecarily a back fire, an all out misfire. Too much fuel won't ignight at all (cut out or as my race driver used to say "burbles @ #### RPM". Backfire is a timeing issue. might consider a smaller jet if possible (have not worked on this vintage jeep and threw the 79's carb in the trash) but if you can go 1 or 2 sizes down to see what happens it may just eliminate yet anouther possibility
     
    rookieupgrade1, May 18, 2006
    #93
  14. May 18, 2006
    Old Bill

    Old Bill Aggressively passive....

    Really Southern...
    Joined:
    Nov 12, 2004
    Messages:
    822
    Re: V6 Cutting out at cruising speeds?

    Sparky, you don't necessarily need to drop the tank to check the pickup. Undo the hose at the fuel pump, and give a blast of air in there. The air pressure should move any loose crud that's residing there. This may also give you some idea of the condition of the fuel line. You didn't say how old those were, and if they're the stock ones, then that may be your trouble....
     
    Old Bill, May 18, 2006
    #94
  15. May 18, 2006
    Txjake

    Txjake I wrenched with Sparky

    Oklahoma City OK
    Joined:
    Feb 3, 2006
    Messages:
    544
    Re: V6 Cutting out at cruising speeds?

    If it backfires through the carb, are you sure you have not jumped timing somewhere? Weren't you adjusting your distributor recently?
     
    Txjake, May 18, 2006
    #95
  16. May 18, 2006
    Alexis

    Alexis

    Re: V6 Cutting out at cruising speeds?


    Adam is out in the field today. He was adjusting the distributor recently. He has a new "odd fire" with new vacuum advance on it. I know he has been outside with the timing light a lot lately. I don't know what "jumping timing" is but he might.
     
    Alexis, May 18, 2006
    #96
  17. May 18, 2006
    jetdoc11

    jetdoc11 New Member

    boston
    Joined:
    May 29, 2005
    Messages:
    28
    Re: V6 Cutting out at cruising speeds?

    ****Oops. I missed the part of the "new poly tank"...my bad.****
     
    jetdoc11, May 18, 2006
    #97
  18. May 18, 2006
    vanguard

    vanguard

    Re: V6 Cutting out at cruising speeds?

    Sparky has a new polyethylene tank.
     
    vanguard, May 18, 2006
    #98
  19. May 18, 2006
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    Re: V6 Cutting out at cruising speeds?

    I'm just blowing this out my backside right now, but is it possible to put an even fire crank in the 225??? You keep saying it ran before with an even fire hei. Maaaayyyybbeee, someone did some work down the line that you don't know about?

    I know thats a long shot, but seems wierd it ran fine before with the even fire.
     
    termin8ed, May 18, 2006
    #99
  20. May 18, 2006
    Jeepsterman

    Jeepsterman I had a beer with Panzer.

    Southgate, MI
    Joined:
    Sep 23, 2002
    Messages:
    90
    Re: V6 Cutting out at cruising speeds?

    Another off the wall thing, is it new vacuum line? I had a truck that as soon as it hit high gear and was under load it would cut out and not run. Turned out the vacuum line was dry rotted. Seemed to much worse when warm and usually only in high gear.
     
    Jeepsterman, May 18, 2006
    #100
Page 5 of 50
New Posts