1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fhead Bellhousing

Discussion in 'Early CJ5 and CJ6 Tech' started by Don X, Feb 27, 2016.

  1. Feb 27, 2016
    Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    San Diego,...
    Joined:
    Mar 30, 2007
    Messages:
    3,383
    There's a threaded hole at the bottom of an fhead bellhousing that just runs into the bellhousing (see pics). What's it for?

    [​IMG]

    [​IMG]
     
  2. Feb 27, 2016
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,118
    It's there to be a conversation piece :)

    Actually, depending on which bellhousing you have it's either a drain or part of the military fording system.

    H.
     
  3. Feb 27, 2016
    Wenaha

    Wenaha Member

    West Coast
    Joined:
    Feb 6, 2014
    Messages:
    415
    It's a drain to let water out. I keep a threaded plug in mine.
     
  4. Feb 27, 2016
    Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    San Diego,...
    Joined:
    Mar 30, 2007
    Messages:
    3,383
    A drain is what I was thinking. Now to find a plug.
     
  5. Feb 27, 2016
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,804
    As Howard said. The military sealed and pressurized the housing for deep water fording.
     
  6. Feb 27, 2016
    Wenaha

    Wenaha Member

    West Coast
    Joined:
    Feb 6, 2014
    Messages:
    415
    of course, I remove the plug before going swimming.
     
  7. Feb 29, 2016
    jeepermc

    jeepermc Active Member

    Western WA
    Joined:
    May 25, 2011
    Messages:
    1,192
    Crank sensor hole for the ultra rare factory fuel injected F head? ;)
     
New Posts