1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

factory dana 18 ebrake and 1310 ujoints?

Discussion in 'Builds and Fabricators Forum' started by robertf, May 23, 2005.

  1. May 23, 2005
    robertf

    robertf New Member

    Joined:
    May 23, 2005
    Messages:
    1
    Is this possible? I haven't seen any flanges that are made specifically for it. Would be pretty cool to retain the transfercase brake, but don't want to step down to smaller ujoints.
     
    robertf, May 23, 2005
    #1
  2. May 23, 2005
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I dont see why they wont work. the yoke bolts to the outside of the drum so the ujoint has nothing to do with the ebrake. You will most likely have to get a custom flange made, but nothing i can see not doable.
     
    DanStew, May 23, 2005
    #2
New Posts