Factory Brake Line Routing

Hey Guys. As the sig below says I am trying to restore my jeep to stock original condition. Right now I am on the brake lines. I am looking to know how the factory routed the front brake lines on the frame. I think I have the back all set.

Can anyone provide a picture(s) of the stock brake line setup for 1974 from the proportion valve to each of the front wheels? Particularly how they are mounted to the frame? I looked in the parts book and did not see anything like this. Thanks!

 

all that was holding mine were those two clamps screwed into the top of the frame rail and two little "S" clips that held the left side line to the clamped down right side line

 

That's just what I was looking for. Thanks Drednot

 

here's another perspective...