F Head Engine Stabilizer Cable

I have read a thread concerning the importance of this cable. I need a picture of how it attaches to the engine. (or bell housing). I have the cable and I understand how the ball attaches to the cross member.
If there is a bracket on the engine end---I may or may not have it in the jeep salad that keeps creeping into my garage while the wife sleeps soundly because I have "promised" not to drag home any more projects or as she says "rust"!! (Sometimes I break my promises)
A pic or a previous thread on topic that has pic would be great!

Thanks--Mike

 

That is what I thought.
Thanks Howard

 

Here is a picture for you. As Howard stated above: If you look towards the bottom of the picture you can see where the cable goes through the bell housing and connects to the fork on the cross member.

OneDrive

 

Don't over-tension the stay cable. Just take up the slack, plus a little tension, then lock it in place with a nut on the back side of the bellhousing.

 

That cable was missing on my '60 when I got it 10 years ago. Do not see the purpose of it. My JEEP operates just fine without it.