1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ecj5 Fender Flares

Discussion in 'Early CJ5 and CJ6 Tech' started by gibson-d@sbcglobal.net, Mar 18, 2020.

  1. Mar 18, 2020
    gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    Houston, TX
    Joined:
    Feb 11, 2007
    Messages:
    93
    I bought a set of fender flares for my '71. Here's the problem: They have mounting holes on the back side, how do I get them clamped in the right position to mark the holes for drilling? This for the fronts only, haven't tried the rears yet. Thanks in advance, David
     
    gibson-d@sbcglobal.net, Mar 18, 2020
    #1
  2. Mar 18, 2020
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,600
    Buildflycrash, Mar 18, 2020
    #2
  3. Mar 18, 2020
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    Hold fender flare against the fender and mark the holes. Remove and drill pen marks. Do the same for the rear.
     
    scott milliner, Mar 18, 2020
    #3
  4. Mar 19, 2020
    BadGoat

    BadGoat How High Can You Climb?

    Northern Virginia
    Joined:
    Apr 27, 2017
    Messages:
    326
    BadGoat, Mar 19, 2020
    #4
    Fireball likes this.
New Posts