1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dash Wiring Issues

Discussion in 'Jeepster Commando and Commando Tech' started by Jbleeds, Jul 8, 2019.

  1. Jul 8, 2019
    Jbleeds

    Jbleeds New Member

    Lancaster, CA
    Joined:
    Dec 20, 2017
    Messages:
    42
    I am trying to figure out all my loose wires under the dash. I have this wire coming off my light mounted under the dash (light might only be found on the convertible). It is a black wire with a yellow stripe. I can't seem to figure out where it terminates. The end is corroded so it has not been attached for a while. Any help is appreciated. dash light 1.jpg
     
  2. Jul 10, 2019
    MrGreenJeeps

    MrGreenJeeps New Member

    Hopkinton, Mass.
    Joined:
    Jun 9, 2006
    Messages:
    36
    I have the courtesy lights on my convertible. I will check the wires and report back. Thanks
     
  3. Jul 10, 2019
    Jbleeds

    Jbleeds New Member

    Lancaster, CA
    Joined:
    Dec 20, 2017
    Messages:
    42
    Thanks. I was able to find a wiring diagram yesterday afternoon that showed that wire goes to the door switches. But thanks for responding. I could use your help with another question I have. I am trying to figure out where exactly the rear convertible deck lid supports go in relation to the deck lid. The body shop welded in new pieces of metal and cannot figure out where the supports bolt on. If you are able to take a picture of the support in relation to the lid that would be very helpful.
     
  4. Jul 13, 2019
    Jbleeds

    Jbleeds New Member

    Lancaster, CA
    Joined:
    Dec 20, 2017
    Messages:
    42
    I was wondering if you were ever able to look at your Jeepster and look at the deck lid and supports? I have no idea where they supports bolt on and would appreciate any help possible. I also have a few other wiring questions, that maybe you can help me with. I have a number of wires that are loose and I am not sure where they attach. It's possible they attach to the other terminal on the relay in the picture, I just don't know. One of the wires in the bunch has a pigtail on it so I know that won't go to the terminal. wiring relay 1.jpg
     
  5. Jul 16, 2019 at 9:17 AM
    MrGreenJeeps

    MrGreenJeeps New Member

    Hopkinton, Mass.
    Joined:
    Jun 9, 2006
    Messages:
    36
    Sorry, havent had a chance but I will today. I dont think I put on my deck lid supports. I think I forgot to put them on. Dont seem to be needed.

    My wiring is no picnic but I will check it out.
     
  6. Jul 16, 2019 at 1:17 PM
    Jbleeds

    Jbleeds New Member

    Lancaster, CA
    Joined:
    Dec 20, 2017
    Messages:
    42
    Thanks. I was able to figure out where the deck lid supports go-in front of the deck lid which seems odd-but any help with the wiring would be a great help. The shop that painted it was supposed to put the wiring back but they never finished the job
     

Share This Page

New Posts