1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 44 No Vent But A Weep Hole?

Discussion in 'Early CJ5 and CJ6 Tech' started by Dauntless1971, Aug 29, 2017.

  1. Aug 29, 2017
    Dauntless1971

    Dauntless1971 Member

    Bend, OR
    Joined:
    Oct 22, 2004
    Messages:
    227
    I had posted a week ago but oil levels in a Dana 30. So I am looking over my rear axle and it has no vent, but it appears there is a weep hole. I find it hard to believe this is stock. Should I fill the hole with rtv or weld it closed. Or perhaps this is a standard hole on a 60's something Dana 44? 20170829_123333.jpg
     
    Dauntless1971, Aug 29, 2017
    #1
  2. Aug 29, 2017
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    To my knowledge it's a standard hole. yours definitely isn't the 1st Jeep from that era to have one.
     
    Glenn, Aug 29, 2017
    #2
  3. Aug 29, 2017
    mike starck

    mike starck Member

    salem,oregon
    Joined:
    Jun 22, 2006
    Messages:
    762
    standard issue on some rear axles.
     
    mike starck, Aug 29, 2017
    #3
  4. Aug 29, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,118
    That's the standard civilian version vent, the military ones have a vent/pressurization fitting on the pumpkin.

    Most are plugged solid, I welded mine up & put a vent/hose where the military one is.

    H.
     
    Howard Eisenhauer, Aug 29, 2017
    #4
    Jrobz23 likes this.
  5. Aug 29, 2017
    Uncle Vin

    Uncle Vin Member 2022 Sponsor

    Long Island, New...
    Joined:
    Sep 29, 2008
    Messages:
    348
    Uncle Vin, Aug 29, 2017
    #5
  6. Aug 30, 2017
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,187
    What Howard says! Plug up what you have and put a real vent in the center casting, or a hose barb with a small hose routed up high with a downturned end.
    -Donny
     
    Keys5a, Aug 30, 2017
    #6
New Posts