1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

For Sale Cleaning Out The Closet... Western Co

Discussion in 'Early CJ-5 and CJ-6 Classifieds' started by durangotang, Jul 20, 2019.

  1. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Went through the garage and it's time to get rid of stuff I won't be using in the near future... all items are in Grand Junction, CO. I'll ship anything that will fit in a flat rate box at cost.

    Each item will get its own post so I can keep track when people reply.

    First up is a Carter Carb body off of my F Head. most of the guts are missing, but you should be able to get those from a good rebuild kit. I might be able to find an accelerator pump cover to throw in.. $50

    carter.jpg
     
    Last edited: Jul 20, 2019
  2. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Ford Carter alternative... direct bolt on for those that are interested... $50

    ford1.jpg ford2.jpg
     
  3. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Some boots I found... I think one is the gas pedal and the other is master cylinder. Likely NOS, but I don't know for sure. $5 takes both boots.jpg
     
    Last edited: Jul 20, 2019
  4. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    1 original T90 shifter knob and 1 D18 shifter knob. Original worn condition, but should still be good. $10 takes both knobs.jpg
     
  5. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    F head flywheel and clutch... these will be expensive to ship... $50 flywheel.jpg
     
  6. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Autolite starter off of my F head... worked when I took it off. $75 starter.jpg
     
  7. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    D18 PTO cover-SOLD
    Shifter boot ring $10 covers.jpg
     
    Last edited: Jul 23, 2019
  8. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Autolite distributor- SOLD
     

    Attached Files:

    Last edited: Jul 23, 2019
  9. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Hood latches $20... springs are springy latches.jpg
     
  10. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Heater plenums, one is set up for control cable to duct air. $20 takes heatervents.jpg both
     
  11. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Ross steering arm... original willys. could use some filing/polishing on the ball end. $10 steeringarm.jpg
     
  12. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Original willys furl sender with brass float... Never tested it. $20 fuelsender.jpg
     
  13. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Battery hold down, SOLD
     

    Attached Files:

    Last edited: Aug 5, 2019
  14. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    F head pushrods, $5 pushrods.jpg
     
  15. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    D18 parking brake... dented edge on lower side of backing plate, but still works. SOLD
     

    Attached Files:

    Last edited: Jul 23, 2019
  16. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    Hand wiper crank for 2A or military setup... or if you just think life is too easy . SOLD
     

    Attached Files:

    Last edited: Jul 23, 2019
    Hellion likes this.
  17. Jul 20, 2019
    durangotang

    durangotang Member

    Western CO
    Joined:
    Mar 17, 2010
    Messages:
    216
    All the control cables you could ever want... What you see is what you get for $50 cables.jpg
     
  18. Jul 21, 2019
    Lee Bennett

    Lee Bennett Banned

    Joined:
    Jan 2, 2019
    Messages:
    295
    I would like this parking brake. How much with shipping to Moberly, MO 65270. PM me please
     
  19. Jul 21, 2019
    garage gnome

    garage gnome Rust polisher Sponsor

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    1,958
    That might be for a 3A/3B/CJ5. 2As and MBs are really short. I can measure the one on my 3A and CJ5.
     
  20. Jul 21, 2019
    TIm E

    TIm E Member Sponsor 2019 Sponsor

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    634
    I think that is actually a D18 PTO cover. The MC cover is round with a flat on one edge.
     
    wheelie likes this.

Share This Page

New Posts