1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

CJ2A Coil Springs

Discussion in 'Flat Fender Tech' started by 48cj2a, Feb 26, 2006.

  1. Feb 26, 2006
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    526
    I was piddling around on the 47 CJ2A parts Jeeps I got a few weeks ago and noticed something weird when looking under it.

    There was a bolt on set of rear coil spring brackets and an odd bracket on the driver side frame rail.

    Does anyone know any information or have an documentation on these brackets?

    pictures: Try again I moved them here

    http://www.midwestwillysreunion.org/art.htm
     
    48cj2a, Feb 26, 2006
    #1
  2. Feb 26, 2006
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    access forbidden.

    I recall seeing them somewhere. think they are helper springs.
     
    66cj5, Feb 26, 2006
    #2
  3. Feb 26, 2006
    Kodiak12060

    Kodiak12060 Sponsor

    Beacon NY
    Joined:
    Sep 27, 2002
    Messages:
    465
    Use w/ the trencher and many of the three point lifts. Had them on my CJ5 w/ Stratton lift.
     
    Kodiak12060, Feb 26, 2006
    #3
  4. Feb 26, 2006
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    My '2A had a set of these on the rear when I bought it, and my Jeep had a 3-point lift and a hydraulic post-hole digger on the rear at one point in its life. The angle-iron repair/reinforcements are quite common on these Jeeps as the added weight for such implements was not kind to the frame of the vehicle.
     
    w3srl, Feb 26, 2006
    #4
  5. Feb 26, 2006
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    526
    There is no evidence of anything previously bolted in the bed. The rear crossmeber was replaced with a large piece of C channel and a hack job step bumper replacement.
     
    48cj2a, Feb 26, 2006
    #5
  6. Feb 26, 2006
    Spicolli

    Spicolli jeep geek

    So. Cal.
    Joined:
    Dec 23, 2004
    Messages:
    188
    look like its set up for coil overload type springs
     
    Spicolli, Feb 26, 2006
    #6
New Posts