1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

CJ-3b Project

Discussion in 'Flat Fender Tech' started by HOGHEAD, Dec 25, 2007.

  1. Dec 25, 2007
    HOGHEAD

    HOGHEAD Made in the U S A

    Sharpsburg
    Joined:
    Sep 29, 2006
    Messages:
    45
    Im new here but not new to jeeps,,,If always loved the small jeeps(Cj models) & have always had one,,
    Ive got a 64 Cj-5 that is 100% stock with 22k on it & Im second owner of it,,,
    I also have a 74 CJ-5 Amc 304 that a rod is raping ,,, A body that is being held togeather with the steel top that is on it,,, Have used her for a daily driver for that last 10 yrs,, So I have been looking for a rust free used body & a 360 amc :flag:to put in her ,,, The 360 was easy ,, 81 Cherakee of a friends was rear ended & he sold me the rebuilt 360 for 150 bucks,,
    The body not so easy ,, till a friend of mine showed me a 59 or 60 WILLYS CJ3b body that he had bought to make a rock crawler with ,, And it has been extended to fit a 74 CJ-5 ,, So I talked him out of it to put on my Cj05 frame,,,R)

    http://www.apple.queensu.ca/CJ3B/Photos/Owners/Downey/Downey59.JPG

    I found a garage to work on this project & Im trying to iron out any and all problems before they come up... Im going to rewire it with a Easy wiring kit that has a Chevy plug for the steering setup,,, Im planing on using a S-10 tilt steering column but I need to know if anyone has gone this route & if so what year should I get ,,,,:?
     
New Posts