1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Can I get a Part # for T18/V6 clutch assembly??

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, May 27, 2004.

  1. May 27, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Well now that i have the parts in my clutches, i need to think of my.. well... Clutch. The clutch on the jeep is the original one i have had, so i am going to replace the pressure plate and disk with new units. I would like the number of a good quality kit for the jeep. Centerforce is nice, just mainly looking for quality and reliablilty. And what do i need?? The ford disc and the V6 pressure plate??

    Thanks!!!
     
    DanStew, May 27, 2004
    #1
  2. May 28, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    BTT
     
    DanStew, May 28, 2004
    #2
  3. May 28, 2004
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Yup, what you said above. Use the V-6 pressure plate and Ford disc, both with matching diameter. Don't forget to replace the pilot bushing and throw out bearing. Nickmil.
     
    nickmil, May 28, 2004
    #3
New Posts