1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bypassing neutral safety switch

Discussion in 'Jeepster Commando and Commando Tech' started by rdynes01, Dec 19, 2014.

  1. Dec 19, 2014
    rdynes01

    rdynes01 Member

    Colorado
    Joined:
    Jun 8, 2008
    Messages:
    113
    Is there a simple way to bypass my neutral safety switch until I can repair it properly ? I need to be able to move the Bullnose around the yard. Thanks Bob
     
    rdynes01, Dec 19, 2014
    #1
  2. Dec 19, 2014
    Pack Rat

    Pack Rat Old Timer

    I live in a...
    Joined:
    Apr 1, 2006
    Messages:
    1,512
    Yup, very easy. NSS is located on the top side of the steering column under the dash. Pull the two wires off, should be purple, and put a jumper wire between the terminals at the wire ends. As long as the tab isn't broken off that moves the contact plate inside the switch they're easy to pull apart and clean and lube up the contacts inside. Not really much to them.
     
    Pack Rat, Dec 19, 2014
    #2
New Posts