1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

buivk v6 engine

Discussion in 'Early CJ5 and CJ6 Tech' started by jsw4bama, Sep 4, 2004.

  1. Sep 4, 2004
    jsw4bama

    jsw4bama New Member

    Joined:
    Sep 4, 2004
    Messages:
    2
    I have a 67 Johnson boat with a buick v6 225 engine in it. Where is the oil pressure gauge hooked to on the engine? It runs but my gauge shows no pressure so I turned it off. I want to install a new gauge to check but it is alot different than the old one. I looked at the back of the one on the boat and I don't see the tubing with oil in it like on the new one. Can anyone help? Thanks.
     
    jsw4bama, Sep 4, 2004
    #1
  2. Sep 4, 2004
    oldjeep

    oldjeep Sisyphus at work

    Victoria, MN
    Joined:
    Sep 19, 2003
    Messages:
    267
    Normally it's on the passenger side of the engine in front of the motor mount.
     
    oldjeep, Sep 4, 2004
    #2
  3. Sep 4, 2004
    imported_DSG

    imported_DSG New Member

    left coast
    Joined:
    Dec 31, 2003
    Messages:
    44
    Here's a picture. like chuck said in front of motor mount, below alternator and above oil filter

    [​IMG]
     
    imported_DSG, Sep 4, 2004
    #3
  4. Sep 4, 2004
    jsw4bama

    jsw4bama New Member

    Joined:
    Sep 4, 2004
    Messages:
    2
    buick v6 engine

    Thanks will check there!
     
    jsw4bama, Sep 4, 2004
    #4
New Posts