1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bellhouseing

Discussion in 'Early CJ5 and CJ6 Tech' started by duke54, Aug 15, 2004.

  1. Aug 15, 2004
    duke54

    duke54 Member

    JACKMAN MAINE
    Joined:
    Apr 15, 2003
    Messages:
    319
    Does a134 L H match up to a134 F H Bellhouseing :rofl:
     
  2. Aug 15, 2004
    jeepngem

    jeepngem New Member

    Riverside,...
    Joined:
    Aug 16, 2003
    Messages:
    47
    duke54: To my knowledge, the bolt patterns are all the same at the engine. However there are different starters...some being supported within the bellhousing. Take note of the trans bolt pattern....T-84 vs T-90. Good Luck!! Glenn
     
  3. Aug 15, 2004
    duke54

    duke54 Member

    JACKMAN MAINE
    Joined:
    Apr 15, 2003
    Messages:
    319
    Thanks for the qwick reply :D :beer: :beer: :hurrican:
     
  4. Aug 15, 2004
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Another thing to look out for is the number of teeth on the flywheel and starter drive. Since the F-head used a different starter than the L-head, I'd look really close at the gears to see if they are compatible. I'd sure hate to bolt it all up only to shear the teeth off the flywheel when you try to start it up!
     
New Posts