1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone Using The Novak 225 V6 Headers With A Power Steering Conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by 71CJ5Renegade, Jun 15, 2017.

  1. Jun 15, 2017
    71CJ5Renegade

    71CJ5Renegade 71cj5RenegadeII

    Bulverde, TX
    Joined:
    Dec 27, 2007
    Messages:
    19
  2. Jun 15, 2017
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,466
    I helped design them with Eric from Novak - you can see how they fit on my 'test' rig at warloch.com. One thing to point out, the Red '51 has a body lift on it, but I have installed them on several other riggs (including my neighbor across the street) in stock height configurations. They work fine for Saginaw manual or power setups.
     
  3. Jun 16, 2017
    Muzikp

    Muzikp Active Member

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    1,450
    I second the pictures would be nice part. Would love to see pics of these installed. I didn't know those existed til I clicked the link, might consider buying those. I hate my fenderwell headers. If anybody wants some fenderwell dump headers to trade for stock manifolds or anything that doesn't dump where these do hit me up.

    [​IMG]
     
  4. Jun 16, 2017
    masscj2a

    masscj2a Member 2023 Sponsor

    Ware, Mass
    Joined:
    Dec 27, 2013
    Messages:
    743
    warlock, do you have any pics to post here ? I have a 62 I am putting a Dauntless in and would like to do PS, and push type slave clutch in. Wondering if these headers will work for me.
     
  5. Jun 18, 2017
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,466
    I'll see if I can bring some over and capture the set installed on my neighbors across the street. It will be after the 4th before I can get them though...

    You can see them on my site with THIS LINK if you want.
     
  6. Jun 18, 2017
    masscj2a

    masscj2a Member 2023 Sponsor

    Ware, Mass
    Joined:
    Dec 27, 2013
    Messages:
    743
    Cool, that showed me some good views. So not too close to the starter issues and what did you do about the steering column?
     
  7. Jun 20, 2017
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,466
    The rig with the pics has a body lift on it. You can clear it with a bit longer column (this is an after market column). If your stock height, it's not an issue to clear most Saginaw installs.

    I didn't do the testing for Manual steering - I think Eric was working on that.

    It does have good clearance for starter - one of the main things I had problems with on the first test run from Saunders.
     
  8. Jun 21, 2017
    masscj2a

    masscj2a Member 2023 Sponsor

    Ware, Mass
    Joined:
    Dec 27, 2013
    Messages:
    743
    Thanks
     
  9. Jul 1, 2017
    71CJ5Renegade

    71CJ5Renegade 71cj5RenegadeII

    Bulverde, TX
    Joined:
    Dec 27, 2007
    Messages:
    19
    Thanks for the reply and the pictures....looks like the steering for my 71 and 55 will interfere.

    Picture with Orange is the 71 other two are from my 55
     
New Posts