1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Another Measurement Needed

Discussion in 'Intermediate CJ-5/6/7/8' started by dane71, Nov 12, 2019.

  1. Nov 12, 2019
    dane71

    dane71 Member 2019 Sponsor

    USA
    Joined:
    May 11, 2017
    Messages:
    133
    This one should be easier than the floor drains you guys helped me with :) It should be the last of this too!

    Anyways I need to know where the brights switch mounts. In the picture I have some dashed red lines as reference points-the left edge and the edge where the floor inclines. I need to know how long the blue and green lines should be. Lemme know if you're measuring for the left or right screw too.
    Many thanks, enjoy your Tuesday! floor switch.jpg
     
  2. Nov 13, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member Sponsor

    Denver, CO
    Joined:
    Jul 18, 2013
    Messages:
    2,429
    Would this be the same on an early cj5? Happy to take the measurement in my 70 for you...
     
  3. Nov 14, 2019
    dane71

    dane71 Member 2019 Sponsor

    USA
    Joined:
    May 11, 2017
    Messages:
    133
    I might see if someone else answers first, just in case the location changed when they went to swinging pedals. I appreciate it though, I'll let you know
     
    FinoCJ likes this.
  4. Nov 15, 2019
    obarrett

    obarrett Member

    Lake County, CA
    Joined:
    Sep 8, 2010
    Messages:
    53
    dane, let me know if this helps...

    1973 CJ6...
    didn't see any other holes in the pan, so I am gonna assume its in the stock position (but PO has changed a BUNCH of stuff...)

    [​IMG]

    [​IMG]
     
    dane71 likes this.
  5. Nov 15, 2019
    dane71

    dane71 Member 2019 Sponsor

    USA
    Joined:
    May 11, 2017
    Messages:
    133
    Looks about right! I'll try it out tomorrow. I really appreciate it
     

Share This Page

New Posts