1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

AA Hanging Pedals

Discussion in 'Early CJ5 and CJ6 Tech' started by RedWing, Feb 4, 2014.

  1. Feb 4, 2014
    RedWing

    RedWing Member

    Sutton Bay
    Joined:
    Oct 30, 2005
    Messages:
    564
  2. Feb 4, 2014
    gunner

    gunner Member

    Washington state...
    Joined:
    Dec 4, 2012
    Messages:
    596
    Someone will chime in who has used them. Often though, they eventually want to go with power assist brakes and this system I don't believe adapts readily to PB. A lot of jalopy/hotrod guys use them.

    I tried the pedals on the postal DJ build I'm doing. For some reason they just didn't fit right and I think it's that things didn't line up right for it after I had put the steering on the left (it was a RHD postal). I got my refund. They are meant for the specific MC.

    I still have the new MC. PM me if you decide to go this route...
     
  3. Feb 5, 2014
    RedWing

    RedWing Member

    Sutton Bay
    Joined:
    Oct 30, 2005
    Messages:
    564
    Thanks for the response. I called them yesterday and they weren't real specific about could another MC be used. I'm not looking for power assisted, but would like to have front disks and they are very specific that this cylinder could not be used for that.

    What set of pedals did you end up with?
     
  4. Feb 5, 2014
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,469
    No - you must use their MC as there is not enough room between the rods. I went with Wilwood single pedal and MC setups on the last rig I put swinging pedals on. Better positioning for the pedals and better MC setups.
     
  5. Feb 5, 2014
    RedWing

    RedWing Member

    Sutton Bay
    Joined:
    Oct 30, 2005
    Messages:
    564
    Fantastic, thanks for the tip. I'll check them out.
     
New Posts