3" Grommet for fuel opening in tub

Anyone know where I can get the rubber grommet that fits in the opening where the fuel neck pops through the tub? 3" diameter...

 

Try this website out.

http://raybuck.com/wsm/i-11146_fuel_filler_pipe_grommet_45-72_cj.html

 

Dana, the one for the earlier jeeps will work but you'll need to make the hole in your body a little larger. I used a flapper wheel on my die grinder to make the hole large enough. It just took a few minutes. Used an outside caliper to measure the grommet and ground the hole till it fit. The inside diameter of the grommet was fine. I did a lot of looking and never found the grommet specifically for the '73 - '75.

 

I have a brand new one for a 3b you can have PM me.

 

http://www.jeepdoc.com/catalog/zproducts.asp?id=27

Last item on the page.