Clean title in my name for a 1946 CJ2A. The body is a 3A and has no rust holes. Some damage to the right rear. I saved the pieces I cut out of the rear wheel wells too if you want to put it back to stock. The wheelhouses have been notched back 2". Toolbox was relocated to rear floor as well. It has a 225 V6 and no transmission. The engine hasn't run in a few years and it might have a spun bearing. Not 100% sure. It is sitting on a home made 2x4 box tubing frame with 2.5" lift YJ springs. The half cab is in great shape and has windows that slide up and down. The WS frame is ok, needs some work and the inner frame has a little bit of rot. Has power steering with a new saginaw box. Has vacuum boosted brakes (front disc, rear drum) and hydraulic novak clutch setup. MC if from a grand cherokee. Has new CJ5 wiring harness for a V6 from walcks in it. Winch is NOT included unless someone has one they would like to trade back. All the controls for the winch are integrated into the wiring and on the dash with a remote solenoid setup under the hood. I have a T90/D18 setup with a V6 adapter I can throw in if interested. I also have a fairly decent CJ5 frame (a little rot on the left rear corner) with axles that I bought to put this body on and it can go with it as well. I have enough pieces to put this thing back together and if someone wants all that stuff too. Comes with a roll bar. Asking $1750 for all this stuff. I have a backhoe with forks, so I'll be able to lift it right up and put it on your trailer.