1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

For Sale 19 Spline D44 Detroit Locker

Discussion in 'Early CJ-5 and CJ-6 Classifieds' started by Ns0mniac, Nov 28, 2019.

  1. Nov 28, 2019
    Ns0mniac

    Ns0mniac New Member

    San Clemente, CA
    Joined:
    Aug 7, 2019
    Messages:
    13
    Got a 19 spline Detroit locker for a Dana 44, 3.92 and higher, works great, $300 or best offer. Message me and I'll text you some pictures and info.
     
    Last edited: Dec 1, 2019
  2. Nov 30, 2019
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    2,317
    You might want state what Series your locker fits. 3 Series fits 3.73 and higher (numerically). The 4 Series fits 4.27 through 5.38 gears.
    -Donny
     
    Ns0mniac likes this.
  3. Nov 30, 2019
    Ns0mniac

    Ns0mniac New Member

    San Clemente, CA
    Joined:
    Aug 7, 2019
    Messages:
    13
    That's true, sorry, forgot that, thanks for reminding me. I thought the carrier break was 3.54 and under and 3.73 and over? It had 4.27's on it when it came out of the Jeep.
     
  4. Dec 1, 2019
    jeepstar

    jeepstar Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    1,438
    So, it's a series 4, will fit a 70 dana 44, with offset flanged 5.38 axle?
     
  5. Dec 1, 2019
    Ns0mniac

    Ns0mniac New Member

    San Clemente, CA
    Joined:
    Aug 7, 2019
    Messages:
    13
    My apologies, the carrier break is 3.92 and up for series 4 3.73 and down for series 3. I believe 1970 was the split year, early 1970 had a 19 or 27 spline two piece axleshaft, later 1970 had a 30 spline flanged axleshaft. If your axle are flanged you have the 30 spline I believe, so it wouldn't fit, but I could be wrong.
     

Share This Page

New Posts