Pto Winch Exhaust Routing

Probably asked this years ago, but does anyone have ideas or photos of their exhaust routing for the f134 cj with a pto winch that has the pto shaft running where the exhaust normally goes? I use flex pipe back to the stock muffler but it never lasts that long. Has anyone tried the mb exhaust that exits under the front passenger side?

 

On a CJ5 the pipe was supposed to be cut and bent to pass under/outside of the frame crossmember.

 

Thank you. I can only see the too images though. Could you post the lower portion please?

 

The whole Koenig manual can probably be found if you search.

 

Haven't had any luck finding it so far. Thank you for the help.

 

The first photo below shows a NOS (aftermarket) mid-pipe for a CJ5 F134 (left) and on the right is a mid-pipe I pulled off my 62 CJ5 which had the exhaust routed under the frame rail as shown in the second photo (that's my 64 CJ5). The NOS pipe I believe is designed for under the transmission support routing (still to be confirmed) and the take-off pipe also looks to be a aftermarket 2" pipe.