1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch Disk Orientation

Discussion in 'Early CJ5 and CJ6 Tech' started by C-dubb, Apr 6, 2022.

  1. Apr 6, 2022
    C-dubb

    C-dubb 1961 CJ5 restomod

    Atchison, KS
    Joined:
    Oct 11, 2021
    Messages:
    83
    Need a little help from you experts. I tore my clutch down a few weeks ago to replace it. What I didn't do was pay attention to the disk orientation. Now that I am ready to put things together, I am not sure which side of the disk faces the F 134 engine. The disk's inner splined shaft sticks out longer on one side than the other. Help would be appreciated. Only want to do this job once.
     
    C-dubb, Apr 6, 2022
    #1
  2. Apr 6, 2022
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,804
    Someone here will know that, it is a too-common question.

    It's been a few decades since I did a CJ, but IIRC sometimes they are (or were) stamped 'front.'
     
    PeteL, Apr 6, 2022
    #2
  3. Apr 6, 2022
    C-dubb

    C-dubb 1961 CJ5 restomod

    Atchison, KS
    Joined:
    Oct 11, 2021
    Messages:
    83
    About 20 years for me too. I looked for a stamp but found nothing.
     
    C-dubb, Apr 6, 2022
    #3
    PeteL likes this.
  4. Apr 6, 2022
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,420
    raised spring side towards transmission
     
    Twin2, Apr 6, 2022
    #4
  5. Apr 6, 2022
    C-dubb

    C-dubb 1961 CJ5 restomod

    Atchison, KS
    Joined:
    Oct 11, 2021
    Messages:
    83
    Thanks.
     
    C-dubb, Apr 6, 2022
    #5
  6. Apr 6, 2022
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,092
    Was this the 8.5" or 9.25" clutch? I recently put a 9.25" clutch in my 3A and it had no markings or instructions. I found the answer in my manual.
     
    garage gnome, Apr 6, 2022
    #6
  7. Apr 6, 2022
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    X2
    True of almost all clutch assemblies.
     
    nickmil, Apr 6, 2022
    #7
  8. Apr 6, 2022
    C-dubb

    C-dubb 1961 CJ5 restomod

    Atchison, KS
    Joined:
    Oct 11, 2021
    Messages:
    83
    It is the 9.25"
     
    C-dubb, Apr 6, 2022
    #8
New Posts