1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Minimal Wire Connections To Make Run

Discussion in 'Early CJ5 and CJ6 Tech' started by matt johnson, Feb 23, 2022.

  1. Feb 23, 2022
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Can someone please diagram the correct wiring needed to make our 67 CJ5 with the f134 run. I have a inline starter button. No wire harness. Thanks in advance.

    Matt
     
  2. Feb 23, 2022
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
  3. Feb 23, 2022
    dozerjim

    dozerjim Member

    western New York
    Joined:
    Nov 22, 2010
    Messages:
    966
    So how much do you have to start with ? Distributor in place, plug wires, coil,starter solenoid on starter? maybe a pic.....
     
  4. Feb 24, 2022
    Bondo

    Bondo Master General Re-Engineer,...

    Greenfield Me.
    Joined:
    Dec 17, 2021
    Messages:
    89
    Ayuh,..... To start an assembled motor on a pallet, ya supply water to it, 'n ya need a set of jumper cables, 'n a 14ga jumper wire,......
    Hook the jumper cables to the solenoid's (+) battery post, 'n the ground(-) to the block,.....
    Use the small jumper wire from the (+) at the solenoid, or battery to the (+) on the coil,.....
    Then short the starter's solenoid exciter post with a screwdriver,......(or yer in-line switch)
    The motor should then roll over, 'n start,.....
     
    matt johnson likes this.
  5. Feb 24, 2022
    matt johnson

    matt johnson Caretaker of family Jeeps

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    227
    Thank you Howard. Forgot that.
     
New Posts