1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Military Tailight Interior Corrosion

Discussion in 'Flat Fender Tech' started by DanStew, Jan 18, 2022.

  1. Jan 18, 2022
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    I got a set of taillights to use on my M38. One light is fine, but the other has this whiteish powdery corrosion on the reflector half of the light. How do i get rid of this? Since the thing is a wierd alloy I am a bit clueless. image0.jpeg
     
  2. Jan 18, 2022
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    is that not zinc plated aluminum?
    Not being an expert I would us baking soda paste and brush like you would battery corrosion. Then hit it with shiny paint.
     
    Last edited: Jan 18, 2022
    ojgrsoi likes this.
  3. Jan 19, 2022
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Could be either a zinc alloy (pot metal) or aluminum. Certainly a drop of pool acid on the metal will detect zinc: HCl + Zn -> H2 + ZnCl. It'll fizz like AlkaSeltzer or Fizzies. This is a destructive test, so don't go wild with the acid.

    In my experience aluminum can oxidize and will be pitted and feel grainy. As above, scrub with a toothbrush and paint it. Not sure the soda paste will do anything other than be a mild abrasive. Won't hurt - wash with water and dry.
     
  4. Jan 20, 2022
    jeeper50

    jeeper50 jeeps 'till I die

    Spanish Fort. AL
    Joined:
    Dec 20, 2007
    Messages:
    844
    Walnut shell blast it, then spray it with zinc chromate
     
    Jw60 likes this.
New Posts