1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rock Sliders/steps

Discussion in 'Early CJ Vendor Directory' started by Norcal69, Nov 11, 2020.

  1. Nov 11, 2020
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,725
    Manufactured as needed, PM me for details.

    3/16" Thick Angle 2" under body, 3" on rocker side.
    1-1/2" tube, .120 wall.
    Coated in fluid film to prevent rust.
    Yup they are heavy.
    $180 per pair plus the ride to you.

    No holes drilled, bare steel sliders/steps.

    These work best if you bolt through the rocker and through the floor board. I pre drill holes in the angle, then using a floor jack and block of wood drill through the rocker/floor board.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Norcal69, Nov 11, 2020
    #1
    454x and eldoradojim like this.
New Posts