1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Charcoal Canister

Discussion in 'Intermediate CJ-5/6/7/8' started by Davew, Aug 24, 2017.

  1. Aug 24, 2017
    Davew

    Davew New Member

    So. Indiana
    Joined:
    Sep 26, 2016
    Messages:
    23
    Does anyone know the mfg for the early 70s vapor canisters? I have seen some on eBay made by Rochester that look like the one I need for my 74 cj5. I need just the 2 ports, in from the tank and out to the snorkel, without the vacuum operated valve. The ones I saw were for 1970 to 73 pontiacs and Cadillacs. Does anyone know if one like this would work? I would order a new one but don't want to deal with the valve. I would appreciate any advice. Thank you.
     
  2. Aug 24, 2017
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    It should work ... AFAIK all that Jeep used were Rochester canisters - a commodity part. A '74 should have the 2-port canister; one connection to the tank and the other to the air cleaner snorkel. No connection to the float bowl, IIRC. This will only work with the factory air cleaner, because the purge comes from the Bernoulli effect of the snorkel air flow over the nipple in the snorkel. There is no valve in the canister, AFAIK. Make sure the canister you get does not need a connection to manifold vacuum - that implies an active valve inside the canister.

    You will also need a liquid check valve under the left rear fender.
     
  3. Aug 24, 2017
    Davew

    Davew New Member

    So. Indiana
    Joined:
    Sep 26, 2016
    Messages:
    23
    Thanks Timgr, glad to hear that. I thought they looked the same.
    Yes I intend to replace the liquid check valve and add a roll over valve. I ordered one of the reproduction LCV but they were out stock/discontinued. The company that made my new poly tank(mts?) makes a compact version that is supposed to replace it for 50 bucks(JLCV-1). I was hoping for cheaper but that's probably not bad for new. Do you or anyone else have any experience with this part?
     
  4. Oct 16, 2017
    TroyGT

    TroyGT Member

    High Point, NC
    Joined:
    Mar 8, 2016
    Messages:
    67
    For those wanting to avoid a purchase... my charcoal canister was in rough shape and I was getting some gas fumes in the garage. So, I cut the top off of it, dumped out the charcoal and cleaned it up real good. Then, went to Petsmart and purchased some fish tank charcoal and filled mine back up again. A little epoxy to put the top back on again and my canister is working perfectly again... no gas smell.

    -Troy
     
    Chuck Tom and 75 DJ like this.
  5. Oct 18, 2017
    Davew

    Davew New Member

    So. Indiana
    Joined:
    Sep 26, 2016
    Messages:
    23
    Good info Troy. I bought a used canister off ebay from a 72 Lemans, I think? It looks like how I remember mine. Can't be sure though because mine has been gone since 1984:oops:
     
  6. Oct 20, 2017
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,116
    i did the same, you can also order from napa the little withe foam that goes on the bottom.
     
    Chuck Tom likes this.
New Posts