1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Kentrol Front Roll Bar

Discussion in 'Early CJ5 and CJ6 Tech' started by Doug, Jan 19, 2005.

  1. Jan 19, 2005
    Doug

    Doug Sponsor

    Galt, CA
    Joined:
    Sep 28, 2002
    Messages:
    12
    Anyone have experience installing the Kentrol Front Roll Bar Kit?

    Most of the front cages I have seen have the spreader bars bent so that they "hump" up in the middle. The kit seems to have a bend that is intended to bow horizontally and not vertically.
     
    Doug, Jan 19, 2005
    #1
  2. Jan 19, 2005
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    I can't remember where the front hoop kit came from that I used in Dutch, but I had the same dilemma - what to do with the bend in the spreaders.

    I ended up replacing them with some simple straight pieces - there was *just* enough room under them for my head to clear. Always thought it looked a bit nicer not having the bend there too.
     
    Boyink, Jan 19, 2005
    #2
New Posts