Hello, I always felt the shifter was a bit tall but after putting in an overdrive my T-90 shifter gets tangled up in second gear. What is...
Hello, Before I dig in what do you think the cause and remedy would be for a 53 Cj that has a driver side lean or sags a bit towards the drivers...
Hello, Working through a OVERDRIVE installation on a Dana 18 T/C. My question is after removing the cover and nut on the input shaft I’m having...
Hello, Slowly making progress removing a Koenig twin stick front and rear PTO. I’ve removed the five square head 3/8” pipe plugs and then removed...
[ATTACH] Hello, I’m trying to remove my Koenig PTO from my TC on my 59-CJ5 to install an overdrive. Of course I have 4 of the 5 half inch bolts...
[ATTACH] Hello, As I’m in the midst of adding an overdrive to my 59 CJ5 would someone know what the circled part of the T90 cover plate is or was...
Hello all. I’m looking for threads or suggestions on removing the T90 and TC as I’m going to rebuild the T90. My question is it possible to just...
Hello, Currently I have a 59 stock CJ5 with a Koenig 50 or 59 twin stick PTO with rear flange and front working winch. For simplistic purposes I’m...
Hello all, I came across a clean low mileage 1979 buick 231 v6 even fire motor and would like to swap out my current stock F-134 out of my 1959...
Hello, I’m interested in what folks use as the roll up window channel weather stripping on the door frame of a Koenig hardtop door. Historically...
Separate names with a comma.