I checked the end play with a daily indicator at front of the crankshaft. And I checked it with a feeler gage at the front main cap.
I pulled the engine out of my M38A1 to replace the rear main seal and clutch. As I was there I put new main bearings and rod bearings in it. My...
What is the diameter of the head bolts on a F-head.
Thanks. I have a extra head I am going try it on the old head.
Has anyone used umbrella style valve stem seals on a f head 134.
Thanks. I idles and runs good. It will not idle if I undo the PVC system and plug it. The reason is since installing the carburetor the engine is...
I rebuilt a YS950 side draft carburetor a the kit came with two different types of base gaskets one is a 1/4 thick and the other is about 1/16...
I have a Carter WO carb that was given to me it is been overhauled. My question is will it bolt up on my M38A1 Fhead engine.
I was given a Holley model 1904 carburetor. I know people have put on early flat fender jeeps when installing a Fhead engine. I need to know if...
In Alabama anything before 1975 does not have to have a title.
Go to the website and they ask some questions yes miles driven and garaged
They quoted me $208 a year I can only put that too
I got Hagerty. I have progressive insurance on everything and they also partnered with haggerty. So I picked up haggerty very reasonable
I think I am going with Hagerty got a quote of 239 a year.
I am getting ready to put my M38A1 on the road. What type on insurance is everyone using. Not the company.
I have a 1952 M38A1 jeep it has the original top bows and hardware in good shape. My question is there any way that I can put a civilian top on...
It has a Bendix. But would like to replace with Spicer.
I am needing the driver side front axle for a Dana 25. For my 1952 M38A1.
There's a plug over the check ball. Tonight I will drill the plug out.
There is a plug over the check ball. I did not remove the plug.
Separate names with a comma.