on my 76 CJ5. Plan on buying a 94 4.0, I already have the preferred crank and rods in my 258. This isn't about I6 vs V8, sticking with the I6. Not...
From what I understand, CJ5's with factory t-18's were shimmed from the factory. Mine has shim's and a bar stock between the skidplate and the...
I have a set of used YJ springs I'm putting for my SOA. They're both 6packs, and one set set has an extra wrap on the end. Which is the front set...
I have a chance to pick up a set of '88 intake/exhaust manifolds to do a single draft to a double barrel set up. I want to go to a MC 2100. Will...
Scratching my head on this one. This pic is the old ball joint back in. I took out the new one because I thought I was having a problem. Seems as...
So here's one of my rotor/hub assy's I recently purchased as a pair (50.00 for both). I cleaned it up and took measurements and this is what I...
Looking for Ford hubs for my D44 conversion. Parts stores want over 300.00 for hub/rotor assy. I can get used for about 50.00 (thats what the guy...
I have a t18 in my 76 CJ5. I have a t15 sitting on my garage floor. Somewhere, sometime, someone told me I can use something out of the t15 for an...
I've read a lot of articles of 4 and 5 pack springs being too soft for CJ soa, I just picked up some 6 pack YJ springs. From what I've read these...
Looking for stock YJ springs for my CJ SOA project, looking for recommendations, thanks.
I have drum all the way around now. Upgrading my axle's to 44s. Front disc are going in (GM). Do I need to upgrade my m/c booster as well? To what?
My jeep: 76 CJ5 258 T18 D20 So plan is to go SOA with stock yj springs, 35" TSL/SX, chevy front D44, Scout II rear D44. I have done some...
I have a D20 in my 76 CJ5. I have a D18 sitting on my garage floor I'm trying to get rid of. Is it worth converting my D20 to 2.46 using the d18...
I have a 76 CJ5 that I've owned for about 30 years. I was told when I bought it it had granny first but didn't believe it because of the way it...
I'm installing 44's in my CJ5 (scout II width, about 58.5" wms). These will be SOA. Going with 35" TSL/SX and 4.56 gears. What is the best way to...
I'm going with Scout II width (about 58.5" wms) front and rear (D44 swap). I want to go with some fat tires, 35x15.5x15, what will be my best...
I had to buy the whole lot to get the parts I wanted. Help identify this tranny/transfercase: [IMG] [IMG] [IMG] It's either a t14 or t15...
I have a 76 CJ5 258 t-18. My plans: Swap out the the d30 and amc 20 for a pair of 44's. Going with 35" tires and plan to set it up for...
Separate names with a comma.