Currently working hydraulic clutch setup for my 68 cj. I used the willwood pull slave and a 3/4in master as recommended and dont get full travel...
Got a line connected and tested, working but not enough stroke. Online it listed recommended master as a 3/4 bore and i had one on hand so that's...
20200517_171832-1 by Kg6sof posted May 21, 2020 at 2:39 PM Original brake master and pedal setup 20200520_094134-1 by Kg6sof posted May 21, 2020...
Original
Original bracket old master removed
New slave old bracket
Slave mounted with linkage
Just needs line
Thanks Cowboy. Yesterday I pulled all the linkage down, removed the stock master and master bracket.. had to use the high lift Jack to raise the...
I have looked at that thread and that's what started me thinking about just using the master that's on the frame, plan was to use it with a pull...
Electric power steering on passenger side,power brakes driver fire wall
68 cj5
Dont need hanging pedals, with the power brake install on this jeep and the long tube headers another master cylinder on the firewall wont be a...
Just picked up a 68 CJ-5 and after 15mile shake down road test im working on a list of needs and wants to get the jeep ready for short road drives...
Separate names with a comma.