One more thing you need to work out. When done blasting you need to get some primer on the metal so you do not have flash rusting. You do not want...
To save time look your tub over and decide if you are replacing any sheet metal. If doing that there is no need in sandblasting those panels...
The FiTech has a return outlet on it
I just love the dual wheel Jeep. There was this guy north of Cinncy that had several of them outside rusting away
The one I used had a different oil filter angle. Had to use a smaller oil filter to miss the lower radiator hose.
Right Stuff is what to use. Make sure the metal surfaces are clean and free of oil film.
That would have been nice when rebuilding the Jeep. Seen ads on FB for them
When I did a remodel at a Komatsu dealer. The mechanics said Cummins was owned by Komatsu. They said the engine looked the same
https://www.facebook.com/marketplace/item/741877751172813/?mibextid=6ojiHh
You can bring the family https://www.facebook.com/marketplace/item/320681627490747/?mibextid=6ojiHh
Go to one of the Buick Forums. You have to join. I found a lot of parts on there cheap
Run a ground wire to one of the anchoring bolts/studs of the light. Fasten the other end to frame or tub.
I used after market timing gear cover. Not a problem, the only issue was the oil filter. I had issues getting the distributor in, I put oil on the...
Walcks I think used that connector on his wiring harness. If you can find out who took over making them you might be able to source them. The...
You can get a 2 wire waterproof connector on Amazon. Splice to the wires you have.
Had this for 47 years, stumbled across it a few days ago. Can not believe it did not get scrapped or lost with all the times I have moved. [img]...
The axle placement does not look right...
Was having troubles bleed brakes when I put everything in new. Start over again. Undo the brakes lines from the MC and put the small short lines...
Since you got the rear tank out might want to put a tank access in the floor above the sending unit. Some flat stock steel, tapping holes and...
I put the FiTech on my oddfire. Also installed a Buick HEI distributor. My engine ran great, the RPM jumped around but the processor in the EFI...
Separate names with a comma.