Thank you everyone for all the information, I was able to get the bushing back on the lower housing. The way I have the housing clamped to retain...
I have removed the through bolt and while it looks like it should separate I haven't been able to encourage it enough to separate the 2 pieces. I...
I do have a 1967 Camaro steering box sitting on a shelf that appears functional and in good condition, I wonder if that would work as replacement...
So I've dropped the steering column before to get better access but it looks like the box is integral to the steering shafts, which requires I...
I followed a guide I saw online. I jacked the wheels off of the ground, keepimg the wheels forward facing, I loosened the set screw, and then...
Thank you, those are very helpful tips!
I already adjusted the steering box, and while all the rubber is dry rotted and will probably be the next problem, I currently think the rubber is...
If you mean how hard is it to pull the steering column out, it's not hard, I had it out recently to make it easier to work under the dash while I...
Is there a technical term for the bushing that I could search for online? The lower bushing sticks out as you say and if I try and push it up...
I have a steering column and Saginaw steering box from a 1966 Chevrolet Corvair ( I think based on the steering wheel) that was installed before...
Thank you specific numbers are useful even if I don't need them anymore!
Thank you Glenn!
I'm wondering what is the front axle width of a truck dana 25 and or 27. There is a guy near Marietta Georgia with a set he says is a dana 53 rear...
I called Fredricks near Hartselle Alabama and they want 1400 for the assembly. The hardest part to get with these seems to be a housing that fits...
I am looking for information on this Roxor Dana 44, I can't seem to find it searching. Especially where to purchase it.
I'm leaning towards a dana 60 front replacement even with the reduced ground clearance. If I did at some point go to 37s what width range would...
The first picture of my previous post has the inside view of that shaft that is sticking through the housing.
[ATTACH] [ATTACH] [ATTACH]
I'm not sure when I take the differential cover off but when I do I'll post that also.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Separate names with a comma.