That's a good idea. I can always find a replacement for the one I know about. Nice.
Thanks nickmil. Summit Racing sells some press adapter kits for 4x4 axle ball joints and I was thinking one of those might have the tapered cup...
I've searched this site and others but I haven't found a part number / manufacturer name combination for the tapered cup used to install the upper...
Thank you jpflat2a.
I think I'm going with 32s for now. I don't like the body lift either. I haven't removed it yet because it gives me convenient access for other...
Thank you sterlclan.
Thanks for the offer of the MC. I installed one I bought from a local auto parts store. The new hard lines reach the driver side ports, but it...
Near the master cylinder is where I remember the VIN tag being. This jeep doesn't have a VIN tag near the master cylinder. I cleaned the right...
I like it! Did it go faster or look sleeker?
The VIN tag is from a 1979 jeep cj5: J9F83EH8... The VIN tag is screwed to the top of the grill near the radiator. Where else did Jeep put...
The brake lines that are left on the Jeep look correct for the Jeep. The front two lines run in the correct location. The left front line is cut...
Yes, it is a 304. The tag on the right valve cover has 103H15. I’m still hunting for what that means. The brake lines were run correctly as far...
I read through the 79 service manual and saw the ports on the driver side as well. I will dig through the manuals for other years to see if I...
More pics are here. The front spring perches are 28" apart and the rear perches are 36" apart. The axles are 1970 vintage but I thought that was...
I have a 1979 CJ5 based on the title. I ordered a new master cylinder from an auto parts store, but the ports are on the driver side of the...
Based on the axles and the dates on the ring gears, I'm thinking the axles came from a 1970 or 1971 Jeepster Commando. Glen and timgr already...
Yes, the date is 11-5-69. Tooth counts are 41-11. The bearings are a little raspy, but overall the axle is in good shape. I'll pull the shafts...
36" spring pads / 50.5" MWS
992633 A little silver lining and it has all its teeth.
This is an incredibly useful link to have. Thank you.
Separate names with a comma.