Thanks Tim, Yea mine is defiantly closer than 3/16" and saw the dent on the filler pipe thought it had gotten it from the frame rail at first...
I was unloading my Cj the other night getting it ready for its annual bath and happen to notice that the fuel tank filler neck is nearly resting...
If you are getting fluid through the brake line then i would move to the wheel cylinder. They are pretty cheep i think i got mine for my rear for...
who would have ever thought instructions lol
Good call. That winch may be old, but it is hands down one of if not most dependable winch around it is also a lot faster than most modern ones....
Heres where how i mounted mine. Probably not the best way but works for me i hardly run my doors. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I got the new switch installed it. I ordered it on Amazon it is an Omix -Ada and appears to have fixed the issue since the problem was occurring...
The other night i had the old CJ out and had to turn on my headlights on the way home. After about 30 min of driving the headlights and gauge...
Found a pic of the calipers notice how the bleeder is on the bottom it makes it impossible to get the air out you will see fluid with no bubbles,...
This is a very common problem. My brake bleeders were located on the bottom of the caliper because the PO had installed them on opposite sides. I...
Welcome Nice Looking Jeepster.
I have just had an issue with my brakes the last week, brakes started feeling softer and took longer to stop it ended up being a master cylinder...
yea thats what i have done on my 74 same as Zila. Siphon as much fuel out as you can, remove the skid plate, filler hose on the right and return...
I agree, i haven't had the best luck with switches on the floor boards. I just had another issue with my floor mounted Hi-Beam switch between the...
That box looks really good i like how far back you were able to get it i have a saginaw box in the stock location i'm always worried about...
I agree with the above post check the caster and try to change that shackle angle. I had wondering issues on my CJ and also have a Flaming river...
yup sure was!
I run 5" shackles on my jeep with 2.5" YJ springs and have another bolt hole in my shackles between the spring and frame mounts i have a sleeve...
Separate names with a comma.