I am not finding a lot of good clear detailed information on what pedal assembly and linkage that's needed when converting to a 225 V6 in a CJ2A....
Hi guys. I seriously need help with my install of XJ pedals in a 2A. I have the XJ pedal assembly and have trimmed the top for fit. Made up a...
Hello Wondering if anyone has used this template to have a fabricator, with a CNC machine, make up a firewall plate for installing XJ pedals in a...
not mine Saw this on FB market and thought it was worth posting. it's a cj2a lefty for 12K...
HAVE A FEW EXTRA PARTS THAT NEED A NEW HOME. Shipping is NOT included. Prefer having parts picked up.,,,,95648 Most parts are for Willys CJ2A...
HELLO GUYS Have a '47 CJ2A with a 225 V6 motor. Installed a '66 mustang radiator and am wondering what radiator hoses have worked for you guys...
Looking for ideas for a under the floor rear gas tank A good source for a DJ3A/DJ5 would be good but hard to locate. Thanks, Jim
Hi guys Installing a 225 V6 in a 47' 2A. What size diameter air cleaner will comfortably fit? 11"? 14"? ??? Most likely the air cleaner...
Does anyone know of a blank over lay dash panel for a 2A? no holes.
Hi guys Wondering if any of you have used Novak's 3/4" thick 225 V6 to the STD. T90 trans adapter in your CJ2A/3A. I purchased one and am in the...
Hi Guys Would one of you guys take time to measure the distance from the bottom of the bellhousing....in the starter area....to the top of the...
Hello guys I am needing to buy a 225 V6 pressure plate. I have the 10 1/2" clutch already. There seems to be two styles, the 3 fork or diaphragm?...
225 OR 231 EF? [ATTACH]
Hi Guys Am about to install a F134 motor in my 2A and I have a few questions for you. First, I will NOT have clearance issues with steering,...
Put some shoes on her and set her down on wheel dollies. Installed Big Willys Hi Line U bolt & skid plates. Next is to put the tub back in place...
Hi guys I've misplaced or lost the illustration/picture showing and describing where each body mount went and what thickness each one was. I...
Brought home the rear Dana 44 off set diff. Running 5:38's, aggressive Power Lok, all new bearings and seals, drilled and tapped for possible ARB,...
hello guys Am wondering if anyone has swapped out CJ-2A headlight buckets for '72/? headlight buckets. The later style looks smaller and shallower...
Hi guys Seems I've missed placed all my stock body mounts for the 2A. At this point and time I'm in need the thickness of the spacer between the...
I'm replacing the tubular crossmember on my '47 CJ-2A. Planning on replacing it with either a piece of 2"x3" OR 3"x3" piece of metal. Question,...
Separate names with a comma.