I drilled out the locations for the booster and brake/clutch M/C 's from a template given to me. Since the brake pedal was hitting the floor, I...
. I have LH/RH taps and am going to make up 2 turn buckles to adjust the clutch/brake rods easily without disconnecting stuff.
Sorry for the LONG delay on getting back to you I simply got caught up with everything. I did use the XJ pedals along with the upgrade 8" dual...
couple of guys are using the Lokar pedal like URL will take you to BUT, this one is a spin off of the Lokar. The guys say the pedal linkage works...
I am not finding a lot of good clear detailed information on what pedal assembly and linkage that's needed when converting to a 225 V6 in a CJ2A....
Worked on the sheet metal replacement surrounding the new battery box on the passenger fender. [ATTACH]
Hi guys. I seriously need help with my install of XJ pedals in a 2A. I have the XJ pedal assembly and have trimmed the top for fit. Made up a...
Qjet's are good if set up correctly. I'm going to run one along with an Offy dual port, HEI, and a rv torque cam. Once all installed it's off to...
just note....I do not know IF this works/accurate which is why I posted if anyone has used it. I could not find the total width or height of the...
Hello Wondering if anyone has used this template to have a fabricator, with a CNC machine, make up a firewall plate for installing XJ pedals in a...
not mine Saw this on FB market and thought it was worth posting. it's a cj2a lefty for 12K...
HAVE A FEW EXTRA PARTS THAT NEED A NEW HOME. Shipping is NOT included. Prefer having parts picked up.,,,,95648 Most parts are for Willys CJ2A...
have no idea regarding if the EF flex plate will bolt up but you may need to have it balanced to your motor if it does fit.
Buick had turbo 225 V6 motors. below is a pic of a '68 225 turbo skylark. still might not solve the answer to the bolt pattern issue though. [IMG]
wonder if someone changed out the crank. Could a turbo crank be different?
looks like you are/were trying to remove the drain plug due to the shine and metal debris.
Progress! found a great upper hose to use. Still working on the lower hose but hopefully will have that solved this week. see pics [ATTACH]...
Where does that retaining ring go? I dont have one nor remember taking one off what you see is either part of the horn assembly or a clip that...
Honestly, the parts are not bad at all. I had planned on using the column in my CJ2A but am going a different route. First, what do you want out...
Made time to remove the bad steering wheel and bottom U-joint. Also took more pics of the parts. Splines look good. Nylon bushing needs...
Separate names with a comma.